Lora-External Powered Solenoid Control

General Features:
1. You can open and close your hydraulic valves with battery power up to 15km.
2. It can perform readings every 5 minutes with the internal battery at certain intervals, and continuously with external and solar panels.
3. It has a 9V-24V 250mA external power input.
4. While in battery mode, it checks center information every 5 minutes.
5. No data loss occurs in case of power off and on.
6. The device has EU-868 Mhz frequency band and 14db output power with Lora modulation and LoraWan protocol.
7. It has an external antenna connection.
8. Configuration processes can be performed through the system.
9. Energy status, operating status, and alarm status can be monitored with the LEDs on it.
10. When the device is not sending data, it operates in Ultra Low Power mode and does not consume unnecessary energy.

Application Areas:
1. Remote on/off
2. Valve opening/closing
3. AMR systems
4. Automation systems
5. Scada systems
6. Remote control systems

Technical Specifications:
1. Frequency Range: 433/490 MHz or 868 / 915 MHz(Customizable:137~1020MHz )
2. Sensitivity up to -139dBm @Lora
3. EU433,CN470-510,CN779-787,EU863-870,US902-928,AU915-928,AS923,KR920-923
4. Maximum output power: 20 dBm
5. 13mA@receiver mode
6. Sleep current <200 nA 7. Data transfer rate: @FSK,1.2-300 Kbps 8. @Lora TM, 0.018-37.5 Kbps 9. Lora TM, FSK, GFSK & OOK Modulation mode 10. Built-in ESD Protection 11. 127 dB Dynamic Range RSSI 12. Packet engine up to 256 bytes with FIFO and CRC 13. Hopping frequency 14. Built-in temperature sensor and low battery indicator 15. Excellent blocking immunity 16. Operating Temperature Range：-40 ~ + 85 °C 17. Low Power Current 4uA 18. Max TX Current 120mA 

Box Content:
1. Lora-External Powered Solenoid Control
2. 1 RF Antenna
3. 1 Extended RF Antenna (optional)
4. 1 3V6 Lithium Battery (Optional)